Change of internal construction

Single row radial ball bearings with high load rating

Single row angular contact ball bearings, polyamide cage

Double row radial ball bearings, without groove, polyamide cage

Double row angular contact ball bearings, without groove, polyamide cage

V-ring seal version A for SNC bearings (optionally with FS seal)

Contact angle 25°

Demountable

Standard version of spherical roller bearings

Contact angle 40° for angular contact ball bearings

32° for 2-row angular contact ball bearings

40° for 1-row angular contact ball bearings

20° for tapered roller bearings

Single row angular contact ball bearings for universal pairing without preload

Precision according to ABEC 3, 5 or 7 standards

Contact angle 15° for angular contact ball bearings

Enlarged contact angle for tapered roller bearings

High accuracy game

Internal clearance smaller than normal

Internal clearance greater than normal

Internal clearance greater than C3

Internal clearance greater than C4

Average internal clearance in microns for ball bearings from diameter 10 to 50 mm

Special clearance, between 5 and 13 μm

Special clearance, between 9 and 17 μm

Special clearance between 13 and 21 μm

Special clearance between 17 and 25 μm

Special clearance, between 21 and 29 μm

Special clearance between 25 and 35 μm

Special clearance, between 30 and 40 μm

Special clearance between 35 and 45 μm

Special clearance, between 40 and 50 μm

Special clearance between 45 and 55 μm

Average bearing clearance in microns (1 micron = 1μm = 0.001 mm)

Low temperature storage -60 °C

Reduced clearance areas (mean internal clearance however identical), grouped rings

Internal clearance for precision miniature bearings

Interior design index for tapered roller bearings

Closed stainless steel lock for housing bearings

Open stainless-steel lock for housing bearings

Enlarged contact angle for tapered roller bearings

Lubrication openings (without grooves)

High-precision angular contact ball bearings with lubrication

O Arrangement

X Arrangement

SNR lubricating greases

Double lip seal for SNC bearings

T Arrangement

Groove and lubrication openings not available (if standard)

Groove and lubrication openings in the outer ring

D1 + anti-rotation ball on outer diameter for bearing inserts

Increased load rating for cylindrical roller bearings and spherical roller bearings

Spherical roller bearings with increased load rating and with a sheet steel cage

Spherical roller bearings with increased load rating and with a solid cage

Double-sided seal

Sealing for SNC bearings

Special crowning of the rollers

Full-walled bearing without openings, e.g. SN520F

Full-walled bearing with openings e.g. UCP320F1

Bearings without mounting holes e.g. UCP322F2

Food grade grease

Felt strip seal for SNC bearings

Sealed bearings for high temperatures up to +150 °C

Protected bearings for high temperatures up to +150 °C

Solid steel cage

Solid cage made of parting steel

Bearings for high temperatures for tunnel kiln cars

Bearings for high temperatures for lubricated and protected tunnel kiln cars

Spherical roller bearings for high load capacity for applications with vibration transmissions

Inner ring + rollers (+ cage) for tapered roller bearings

Outer ring only for tapered roller bearings

Universal design

Disassembly sleeves - modified thread - conformity according to ISO 2982-1

Fixed bearing without ring lock e.g. SD3130G

Bearings with special fastening openings (n = 1,2,3…). E.g. UCHB204G6

2 universal bearings in a single housing

Pretension (light, normal, medium, high)

Solid brass cage

Relubrication system for bearing inserts

Polyamide cage

Glass fiber reinforced polyamide cage

Clamping sleeves with oil injection device (e.g. AH24T48H)

Special interior design to accommodate axial loads on cylindrical roller bearings

High temperature storage +200 °C

Sealed bearings for high temperatures up to +200 °C

Protected bearings for high temperatures up to +200 °C

Protected bearings for high speeds up to 700,000 N.Dm

Sheet steel cage

Conical bore 1/12

Conical bore 1/30

NUP without press plate

Press plate for NUP

Flanged bearing with grease nipple and oil drain opening, e.g. SN515L1Z

Flange bearing with opening for grease nipple and oil drain opening

Labyrinth seal for SNC bearings

Bearings with double lip seals and low torque

High torque triple lip seal bearings

Sealed bearings for low temperatures down to -40 °C

Protected bearings for low temperatures down to -60 °C

Contact nitrile seal (-20 to +120 °C)

Contacting polyacrylic seal (-15 to +150 °C)

Contacting fluorinated elastomer seal (-30 to +230 °C)

Contacting silicone seal (-60 to +200 °C)

Contacting high nitrile seal (-20 to +140 °C)

Frictional, high polyacrylic seal (15 to +175°C)

Non-contact nitrile seal (-25 to +120 °C)

Non-contacting polyacrylic seal (-10 to +150 °C)

Non-contact sealing made of fluoroelastomer (-30 to +200 °C)

Non-contact silicone seal (-100 to +200 °C)

Contacting nitrile sealing low torque (-25 to +120 °C)

Contact polyacrylic sealing low torque (-10 to +150 °C)

Fluorinated contact elastomer seal with low torque (-30 to +200 °C)

Contact silicone seal with low torque (-100 to +200 °C)

Contact high nitrile seal with low torque (-20 to +130 °C)

Contact high polyacrylic seal with low torque (-10 to +150 °C)

Durable standard grease (-20 to +80 °C)

Durable high temperature grease (-20 to +120 °C)

Durable food-compatible lubricating grease -10 to +100 degree (permanent 80 °C)

Durable high-temperature lubricating grease for needles (-20 to +120 °C)

Seal with special seal

Solid cage made of riveted brass

Triple lip seal for bearing inserts

Lubricating grease: Kyodo Yushi / E5 (-30 to +180 °C)

Lubricating grease: Klüber / Asonic HQ72-102 (-40 to +180 °C)

Lubricating grease: Exxon / Polyrex EM / Polyree (-25 to +170 °C)

solid cage, axially aligned with the rolling elements

Outer ring + rollers (+ cage) for cylindrical roller bearings

Inner ring only for cylindrical roller bearings

Groove for lock ring on the outer ring

Steel bearing e.g. P315N

Cast iron bearings GS. E.g. P315N1

Groove and lock ring on the outer ring

Groove and lock ring on the opposite side (contrast to the standard)

Retaining groove

Special precision bearings for electric motors

Precision grade JIS 4 for the dimensions and JIS 2 for runout

Precision P6 and air C3 / DIN standard electric motors

Precision class JIS 6

Precision class JIS 5

Precision class JIS 4 / BAS 4 for tapered rollers

Precision class K for tapered rollers, series J

Special precision with development index

Filling with grease: from 5.0 to 10.0%

Filling with grease: from 7.5 to 12.5%

Filling with grease: from 10.0 to 15.0%

Filling with grease: from 12.5 to 17.5%

Filling with grease: from 15.0 to 20.0%

Filling with grease: from 17.5 to 22.5%

Filling with grease: from 20.0 to 25.0%

Filling with grease: from 22.5 to 27.5%

Filling with grease: from 25.0 to 30.0%

Filling with grease: from 27.5 to 32.5%

Filling with grease: from 30.0 to 40.0%

Filling with grease: from 35.0 to 45.0%

Filling with grease: from 40.0 to 50.0%

Filling with grease: over 50%

Round outer diameter

Special control (S20: Railroad / S30: wind energy)

Changed interior design (low torque)

Changed interior design (n = 1, 2, 3 ...) (low torque)

V-ring seal complete for SNC bearings

Taconite seal for SNC bearings

Special cross brace. Nnnn: order number

Special cross brace. Nnnn: order number

Special cross brace. Nnnn: order number

Cage made of fabric with Bakelite coating

Cage made from plastic, nylon, or Teflon

Special polyamide cage for tight ball bearings

Polyamide cage 4.6 for cylindrical roller bearings

Cage peek for NN camp

Bearing inserts for operating temperature up to - 40 °C

Bearing inserts for operating temperature up to + 200 °C

Reinforced version for tapered roller bearings

Spherical roller bearings with high load capacity for vibration gear applications

Ultra-high precision

Interior design for spherical roller bearings

Cylindrical roller bearings without cage

Special stock: summarizes other suffixes (n = 1, 2, 3 ...)

Special tolerance for screen bearings

Bearing with clamping screw type nozzle needle

Bearing with clamping screw type nozzle needle, different from W3

Bearing with clamping screw type nozzle needle, different from W5

Groove and lubrication holes in outer ring

Special bevel n: 1.2 ...

Sheet brass cage for ball bearings with a small cross-section

Flange bearing with rubber seal type Z

Protective cover on one side

Flange bearing with felt strip seal

Two-sided protective cover

Removable protective cover

Stainless steel protective cover

Grease: Shell / Alvania Grease S2 (-25 to +120 °C)

Grease: Shell / Alvania Grease S3 (-25 to +135 °C)

Precisions in accordance with the standards AFBMA for conical rollers in size inches

Lubricating grease: Chevron / SRI-2 (-29 to +177 °C)

Lubricating grease: Kyodo Yushi / Multemp SRL (-40 to +150 °C)

Lubricating grease: Shell / Aero Shell Grease 7 (-73 to +149 °C)

Lubricating grease: Klüber / Isoflex Super LDS 18 (-60 to +130 °C)