Suffix C:
C |
Contact angle 15 ° for angular contact ball bearings |
C |
Enlarged contact angle for tapered roller bearings |
C9, C0, C1 |
High accuracy game |
C2 |
Internal clearance smaller than normal |
C3 |
Internal clearance greater than normal |
C4 |
Internal clearance greater than C3 |
C5 |
Internal clearance greater than C4 |
CMxx |
Average internal clearance in microns for ball bearings from diameter 10 to 50 mm |
CM09 |
Special clearance, between 5 and 13 μm |
CM13 |
Special clearance, between 9 and 17 μm |
CM17 |
Special clearance between 13 and 21 μm |
CM21 |
Special clearance between 17 and 25 μm |
CM25 |
Special clearance, between 21 and 29 μm |
CM30 |
Special clearance between 25 and 35 μm |
CM35 |
Special clearance, between 30 and 40 μm |
CM40 |
Special clearance between 35 and 45 μm |
CM45 |
Special clearance, between 40 and 50 μm |
CM50 |
Special clearance between 45 and 55 μm |
CSxx |
Average bearing clearance in microns (1 micron = 1μm = 0.001 mm) |
CT1 |
Low temperature storage -60 °C |
CxNA |
Reduced clearance areas (mean internal clearance however identical), grouped rings |
CNL, CNS |
Internal clearance for precision miniature bearings |
C/C12 |
Interior design index for tapered roller bearings |
CC |
Closed stainless steel lock for housing bearings |
CO |
Open stainless-steel lock for housing bearings |
Suffix D:
D |
Enlarged contact angle for tapered roller bearings |
D |
Lubrication openings (without grooves) |
D |
High-precision angular contact ball bearings with lubrication |
DB |
O Arrangement |
DF |
X Arrangement |
D** |
SNR lubricating greases |
DS |
Double lip seal for SNC bearings |
DT |
T Arrangement |
D0 |
Groove and lubrication openings not available (if standard) |
D1 |
Groove and lubrication openings in the outer ring |
D2 |
D1 + anti-rotation ball on outer diameter for bearing inserts |
Suffix E:
E |
Increased load rating for cylindrical roller bearings and spherical roller bearings |
EA |
Spherical roller bearings with increased load rating and with a sheet steel cage |
EM |
Spherical roller bearings with increased load rating and with a solid cage |
EE/2RS |
Double-sided seal |
EC |
Sealing for SNC bearings |
En |
Special crowning of the rollers |